The fluidized bed has a round structure to avoid dead corners.
The hopper is set to stir to avoid the agglomeration of wet materials and the formation of ditch flow when drying.
It adopts tipping and unloading, which is convenient, quick and thorough. It can also design automatic feeding and discharging system according to requirements.
Closed negative pressure operation, air flow is filtered. Easy to operate and easy to clean, it is the ideal equipment to meet the requirements of "GMP".
The drying speed is fast and the temperature is uniform. The drying time of each batch is generally 20-30 minutes.
Dry wet granules and powder materials in medicine, food, feed, chemical and other fields.
Mechanism screw extruded granules, swing granules, wet high speed mixed granulation granules.
Large particles, small lumps, sticky lumpy materials.
Materials such as taro that change volume when dried.
Installation structure diagram :
After the air is purified by heating, it is introduced from the lower part by the induced draft fan and passes through the mesh plate of the hopper. In the working room, fluidization is formed by the action of stirring and negative pressure. After the water quickly evaporates, it is taken away by the exhaust, and the material is quickly dried.
|Fan||Air volume||3 /h m 3 / h||2361||3488||4000||4901||6032||7800||10800||1500|
|Wind pressure||2 O mmH 2 O||594||533||533||679||787||950||950||1200|
|Steam consumption||Kg / h||141||170||170||240||282||366||451||800|
|Operating time||min||15-30 (depending on material conditions)|